INNOVATIVE, ECO-FRIENDLY WALL AND UNDERFLOOR HEATING (& COOLING!)
SLIMLINE UNDERFLOOR OR WALL HEATING
Panels just 12.5mm thick
NEWS. NEWS. NEWS.
Say 'goodbye' to radiators!
Our Meditherm® (established 1994) wall and underfloor heating systems is based on the slimmest internal pipework (just 6mm). It means your underfloor or wall heating once rendered or plasterboarded can be as slim as 12.5mm. Now you can retro-fit underfloor heating where it would not be possible. For wall, ceilings or underfloor, Build4 provide the most innovative heating system and support you will find.
UNDERFLOOR HEATING
- Using 6mm diameter pipes, this is the slimmest wet underfloor heating available.
- No drying with Meditherm® boards, ready for use the same day!
EASY-FIT WALL & CEILING HEATING
- 6mm pipes are embedded in to plasterbord, fermacell board, or cement board and can be laminated together with insulation 6mm-100mm
WHAT WE DELIVER
Assuming you have decided on your heating source (but ask us if you haven't) we will supply everything you need to heat and control the room temperatures of the areas you specify. 
If you are installing underfloor heating you have a choice of underfloor heating boards or loose pipes supplied with all the necessary fitting needed to complete the job. If you are installing wall or ceiling heating we pre-assemble the 6mm pipework into conventional or fully insulated boards making installation much, much easier.
HEATING AND COOLING
Our Meditherm® system is able to allow cooling as well as heating. You can consider it as a serious alternative to energy-sapping air conditioning systems. Linked to the appropriate heat supply Meditherm® can make a great difference to medical establishments and offices to make conditions comfartable in periods of hot weather.
BUILD4 CONSTRUCTION
Like the best ideas our Meditherm® system is simple. It is based on slimline flexible 6mm pipes which are fed by 20mm distribution pipes. They are connected by John Guest® connectors. 
As with conventional heating you can add thermostatic controls to each room area and to any hot water supply (gas, oil, electric or new energy efficient sources).
BUILD4 & YOUR PROJECT
Your project may be a new home or a partial refurbishment. Tell us about it and we can advise on any aspect of the heating system, from energy source to cooling. Based on the room sizes and areas we can calculate what you need and let you have quotes. All the ingredients you will need are supplied from us so we're ready to go when you are!'
